ConiuGo 700100107 EasyGuard II 700100107 User Manual
Product codes
700100107
44
Revision 9.0
GSM Alarm & Telemetry systems
“0“:
For triggering the action this value has to go to the level “0” (low).
“1”:
For triggering the action this value has to go to the level “1” (high).
Please set all values, which shall not have any function to “X“.
This applies for digital inputs as well as analog in-puts, Power
good, time frames, GSM status and incoming SMS..
12.6 <S>ave Changes
If you have entered all parameters, return to the main menu and select the menu
item “Save Changes”. Only by doing this, the new configuration will overwrite
the previous set configuration.
Only by executing the “Save Changes” command, any modifica-
tions will be stored in the GSM module!
12.7 <Q>uit Configuration Mode
After saving the changes, you can leave the programming using the command
<Q>uit Configuration Mode. The Module performs a standard check of its tasks.
When this check is completed it will switch to the normal RUN-mode (standard
mode).
Your selection: Q
Initialisation of Tasks
Real Time Clock is installing
Task Dispatcher is starting
Task GSM Control is starting
Task Time Control is starting
Task Port Control is starting
Task Analog Control is starting
Task Incoming SMS is starting
Task Sending SMS is starting
Task Sending actual status is starting
Task Display is starting
Task Voice Connection is starting
Initialisation of Tasks
Real Time Clock is installing
Task Dispatcher is starting
Task GSM Control is starting
Task Time Control is starting
Task Port Control is starting
Task Analog Control is starting
Task Incoming SMS is starting
Task Sending SMS is starting
Task Sending actual status is starting
Task Display is starting
Task Voice Connection is starting