Nitecore LED Torch CB6 Cameleon battery-powered 440 lm 138 g Black CB6 Data Sheet

®

User Manual

• Featuring five individual light sources: two main LEDs plus secondary red, 

green and blue LEDs.

• Four selectable modes of output (red, green, blue and white)

• Dual side switches offer increased control of color modes

• Purpose-designed for law enforcement, hunting and tactical applications

• White light mode is powered by a premium CREE XP-G2(R5) LED, 

providing up to 440 lumens of output

• Up to 400 hours runtime on low

• Integrated “Precision Digital Optics Technology” provides extreme reflector 

performance

• Equipped with a unique multi-colored (red, green and blue) signaling mode

• Dual side switches control white and colored LEDs independently.

• Side switch features integrated power indicator light for displaying remaining 

battery power (patented)

• Instant-start - enter turbo mode directly

• Physical reverse polarity protection mechanism (patented)

• Stainless steel titanium-plated clip

• Stainless steel retaining ring protects the core components from damage

• Toughened ultra-clear mineral glass with anti-reflective coating

• Constructed from aero-grade aluminum alloy

• HAIII military grade hard-anodized finish

• Waterproof in accordance with IPX-8 (two meters submersible)

• Impact resistant to 1.5 meters

• Tail stand capability

Length: 143mm (5.63”)

Head Diameter: 40mm (1.57”)

Tail Diameter: 25.4mm (1”)

Weight: 138grams (4.87oz)(without battery)

Quality holster, clip, tactical ring, lanyard, spare tail cap, spare O-ring
Optional accessories

Remote switch (RSW1), Gun Mount (GM02, GM03, GM04)

Battery Installation 

Insert one 18650 battery or two CR123 / RCR123 batteries with the positive 

pole pointing forward (toward the light head).

The above data has been measured in accordance with the international 

flashlight testing standards ANSI/NEMA FL1 using one x 3.7V 2600mAh 

Nitecore 18650 battery and 2 x 3V 1550mAh Nitecore CR123 batteries under 

laboratory conditions. The data may vary slightly during real-world use due to 

battery type, individual usage habits and environmental factors.

NITECORE (SYSMAX) is a member of PLATO, participating in and helping to 

develop the ANSI FL1 standard of measurement. Product testing data is in 

accordance with these internationally recognized scientific standards.

SIZE

Nominal voltage

Compatible

Primary Lithium battery 

CR123

3V

Y (Recommended)

18650 Rechargeable Li-ion battery

18650

3.7V

Y (Recommended)

Rechargeable Li-ion battery

RCR123

3.7V

Y

CR6: 

Main red light mode is powered by a premium CREE XP-E(R2) LED

CG6: 

Main green light mode is powered by a premium CREE XP-E(G2) LED

CB6: 

Main blue light modes is powered by a premium CREE XP-E(D4) LED

1. Ensure batteries are inserted with the positive (+) end pointing to the head. 

The Chameleon will not operate with incorrectly inserted batteries.

2. Ensure when turning the Chameleon on, the beam is directed away from 

the eyes of people or animals.

Momentary illumination can be achieved by switching off the flashlight and 

then half pressing and holding the tail switch. Simply release the switch to 

turn the light off.

To switch ON: Press the button on the tailcap until a “click” is heard.

To switch OFF: Press the button on the tailcap a second time until a “click” is 

heard.

Two side switches control the two main LEDs as well as strobe / SOS modes.
With the light turned on at the tailcap, press the left switch repeatedly to cycle 

though the following WHITE LED brightness levels: ultra-low, low, medium, 

high and turbo. Once a desired setting is displayed, it will be saved by turning 

the light off at the tail switch.
With the light turned on at the tailcap, press the right switch repeatedly to 

cycle though the following COLORED LED brightness levels: main color low 

-> main color medium -> main color high -> secondary red -> secondary 

green -> secondary blue. Once a desired setting is displayed, it will be saved 

by turning the light off at the tail switch.

With the light turned off, press and hold the side control switch all the way 

down then press the tail switch to go directly to turbo or high (main color) 

mode. This feature will assist in directly switching to the highest modes of 

output for emergency situations.
NOTE: When using two CR123 batteries, the light will automatically lower its 

output after 20 minutes to prevent overheating and battery damage.

With the light turned on, press and hold the left (white) switch all the way 

down for more than 1 second to cycle through the following modes: strobe 

mode -> location beacon -> SOS.
With the light turned on, press and hold the right switch (colored) all the way 

down for more than 1 second to active police warning signal. Press the switch 

again to turn this mode off.
NOTE: Among all special modes, only strobe mode can be saved.

1. With the light switched on, the power indicator on brightness adjustment 

button will blink once every two seconds when power levels reach 50%.

2. With the light switched on, the power indicator on brightness adjustment 

button will blink rapidly when power levels are low.

When the power indicator blinks rapidly this indicates the batteries need to be 

replaced. Alternatively if the light becomes dim or unresponsive to adjustment 

this also indicates batteries need to be replaced.

Every 6 months, threads should be wiped with a clean cloth followed by a thin 

coating of silicon-based lubricant.

All NITECORE® products are warranted for quality. DOA / defective products 

can be exchanged for replacement through a local distributor/dealer within the 

14 days of purchase. After 14 days, all defective / malfunctioning 

NITECORE® products will be repaired free of charge for a period of 18 

months from the date of purchase. After 18 months, a limited warranty 

applies, covering the cost of labor and maintenance, but not the cost of 

accessories or replacement parts. The warranty is nullified in all of the 

following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by 

unauthorized parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please 

contact your national NITECORE® distributor or send an email to 

service@nitecore.com
The Nitecore official website shall prevail in case of any product data changes.