Cep Terminals GSM/GPRS TERMINAL CT63 JAVA 6203 User Manual
Product codes
6203
Java User’s Guide
4.4 Handling Interfaces and Data Service Resources
26
wm_java_usersguide_v19
Page 25 of 109
2012-01-27
Confidential / Released
4.4.1.2
State 2: No Java Running, General Purpose I/O and I2C/
SPI
SPI
The Java application is inactive. There is an AT parser with CSD on ASC0 as well as ASC1.
Up to ten I/O pins are used as general purpose I/O plus a I2C/SPI interface. The pins are con-
figured by AT^SCPIN and AT^SSPI (refer
Up to ten I/O pins are used as general purpose I/O plus a I2C/SPI interface. The pins are con-
figured by AT^SCPIN and AT^SSPI (refer
Figure 11: Module State 2
4.4.1.3
State 4: Default – Java Application Active
The Java application is active and ASC0 and ASC1 are used as System.out and/or CommCon-
nection. Java instances of AT commands are connected to the available AT parsers. The Java
application is activated with AT^SJRA (refer to
nection. Java instances of AT commands are connected to the available AT parsers. The Java
application is activated with AT^SJRA (refer to
) or autostart.
Figure 12: Module State 4
4.4.1.4
State 5: Java Application Active, General Purpose I/O and
I2C/SPI
I2C/SPI
The Java application is active and ASC0 and ASC1 are used as System.out and/or CommCon-
nection. The Java application is activated with AT^SJRA. The I/O pins are configured with
AT^SCPIN, the I2C/SPI interface with AT^SSPI. Refer to
nection. The Java application is activated with AT^SJRA. The I/O pins are configured with
AT^SCPIN, the I2C/SPI interface with AT^SSPI. Refer to
for AT command details.
Figure 13: Module State 5