Microchip Technology Universal Device Programmer DV007004 DV007004 User Manual
Product codes
DV007004
MPLAB
®
PM3 User’s Guide
DS51464C-page 116
© 2006 Microchip Technology Inc.
B.7.2
Additional Error Messages
• Hardware needs to be reconfigured. Please attach to PC and connect through
MPLAB IDE to update [error number] – BIOS needs to download a newer version
of some firmware.
of some firmware.
• Fatal Error: Hardware not found. Contact your local field office for assistance
[error number] – Cannot read a piece of hardware.
• Fatal Error: Memory Failure. Contact your local field office for assistance. [error
number] – Memory test failed.
B.7.3
LCD Version Screen
On system boot-up, the version screen is displayed.
Bios Version………………………………………………[ver]
OS Version……………………………………………………[ver]
Supervisor Version………………………………[ver]
Memory Controller Version……………[ver]
HS Shifter Version………………………………[ver]
Daughter Board Version……………………[ver]
USB EEPROM Version………………………………[ver]
Database Version……………………………………[ver]
No Calibration Required!
B.8
LIMITATIONS
B.8.1
General Limitations
• View the “Readme for MPLAB PM3.txt” file for a list of currently supported
devices.
• Program memory ranges that are not code-protected may only be changed from a
‘1’ to a ‘0’. Most devices need to be erased before they can be reprogrammed.
DataEE does not need to be erased before it is programmed; however, it is
programmed one location at a time. For more information, consult the specific
programming specification for your device.
DataEE does not need to be erased before it is programmed; however, it is
programmed one location at a time. For more information, consult the specific
programming specification for your device.
• Some devices program multiple locations at once. MPLAB PM3 therefore inhibits
programming ranges not aligned to these bounds. See individual programming
specifications for more information.
specifications for more information.
B.8.2
Device-Specific Limitations
In addition to the general limitations listed above, some PICmicro MCUs may have
device-specific limitations. Select the device family limitations listed below, or search
for your device in the index.
device-specific limitations. Select the device family limitations listed below, or search
for your device in the index.
B.8.2.1
MPLAB PM3 LIMITATIONS FOR PIC18C601/801
• Your own memory read/write routines must be used for these ROMless devices.
B.8.2.2
MPLAB PM3 LIMITATIONS FOR ALL DEVICES
• For ICSP you must connect the AV
DD
and AV
SS
pins in addition to the V
DD
and
V
SS
pins for the device to program.