Microchip Technology Universal Device Programmer DV007004 DV007004 User Manual
Product codes
DV007004
MPLAB
®
PM3 User’s Guide
DS51464C-page 20
© 2006 Microchip Technology Inc.
2.5.4
Selecting a Device in MPLAB IDE
Chose Configure>Select Device to select the device you wish to program from the list
of available devices (Figure 2-7). When you select a device, indicators next to the
Microchip Tools names show the level of support for that device:
• Green – supports the device
• Yellow – limited (advance) support
• Red – no support.
If the selected device is supported by MPLAB PM3, click OK.
of available devices (Figure 2-7). When you select a device, indicators next to the
Microchip Tools names show the level of support for that device:
• Green – supports the device
• Yellow – limited (advance) support
• Red – no support.
If the selected device is supported by MPLAB PM3, click OK.
FIGURE 2-7:
SELECT DEVICE DIALOG
2.5.5
Enabling MPLAB PM3
To enable MPLAB PM3, select Programmer>Enable Programmer (Figure 2-8). The
MPLAB PM3 toolbar will appear when the programmer is enabled. See Chapter
7. “MPLAB PM3 – MPLAB IDE Reference” for more reference information on the
MPLAB PM3 programmer. The MPLAB PM3 Card is available from the Programmer
menu only if you have the MPLAB PM3 Card inserted in the MPLAB PM3 programmer.
MPLAB IDE may warn you that your programmer OS Suite is out of date. If you choose,
MPLAB IDE will automatically update the necessary files at these warnings.
MPLAB PM3 toolbar will appear when the programmer is enabled. See Chapter
7. “MPLAB PM3 – MPLAB IDE Reference” for more reference information on the
MPLAB PM3 programmer. The MPLAB PM3 Card is available from the Programmer
menu only if you have the MPLAB PM3 Card inserted in the MPLAB PM3 programmer.
MPLAB IDE may warn you that your programmer OS Suite is out of date. If you choose,
MPLAB IDE will automatically update the necessary files at these warnings.
FIGURE 2-8:
ENABLE PROGRAMMER