Microchip Technology Universal Device Programmer DV007004 DV007004 User Manual
Product codes
DV007004
MPLAB
®
PM3 User’s Guide
DS51464C-page 26
© 2006 Microchip Technology Inc.
3.6
SETTING UP LANGUAGE TOOLS
Step Two of the Project Wizard sets up the language tools that are used with this
project. Select “Microchip MPASM Toolsuite” in the Active Toolsuite list box. Then
“MPASM” and “MPLINK” should be visible in the Toolsuite Contents box. Click on each
one to see its location. If MPLAB IDE was installed into the default directory, the
MPASM assembler executable will be:
project. Select “Microchip MPASM Toolsuite” in the Active Toolsuite list box. Then
“MPASM” and “MPLINK” should be visible in the Toolsuite Contents box. Click on each
one to see its location. If MPLAB IDE was installed into the default directory, the
MPASM assembler executable will be:
C:\Program Files\Microchip\MPASM Suite\MPAsmWin.exe
and the MPLINK linker executable will be:
C:\Program Files\Microchip\MPASM Suite\MPLink.exe
If these do not show up correctly, use the Browse button to set them to the proper files
in the MPLAB IDE subfolders.
in the MPLAB IDE subfolders.
FIGURE 3-4:
PROJECT WIZARD – SELECT LANGUAGE TOOLS
When you are finished, click Next>.