Microchip Technology Universal Device Programmer DV007004 DV007004 User Manual
Product codes
DV007004
Using the MPLAB PM3 Card
© 2006 Microchip Technology Inc.
DS51464C-page 51
6.2.1
Creating an MPLAB PM3 Environment on the MPLAB PM3 Card
An Environment can be created in MPLAB IDE and saved to the MPLAB PM3 Card,
your hard drive or other storage device. Multiple Environments can be created, each
with its unique name and settings. When an Environment is created and saved, the
environment file and all associated files are saved into the same folder.
To create and save an MPLAB PM3 Environment on the MPLAB PM3 Card using
MPLAB IDE:
1. Open a workspace or import a hex file into MPLAB IDE. Refer to the MPLAB IDE
your hard drive or other storage device. Multiple Environments can be created, each
with its unique name and settings. When an Environment is created and saved, the
environment file and all associated files are saved into the same folder.
To create and save an MPLAB PM3 Environment on the MPLAB PM3 Card using
MPLAB IDE:
1. Open a workspace or import a hex file into MPLAB IDE. Refer to the MPLAB IDE
on-line help for additional information.
2. If the MPLAB PM3 programmer is not already enabled, select
Programmer>Enable Programmer to enable the programmer.
3. Select Configure>Select Device to open the Select Device dialog. Select the
device for which you wish to create an Environment. (See
Section 2.5.4 “Selecting a Device in MPLAB IDE” for additional information.)
Section 2.5.4 “Selecting a Device in MPLAB IDE” for additional information.)
4. Select Programmer>Settings to configure the MPLAB PM3 programmer’s
settings, such as the memory ranges, voltages or SQTP. (See
Section 7.5 “Programmer Settings” for additional information.) When finished,
click OK to close the Programmer dialog.
Section 7.5 “Programmer Settings” for additional information.) When finished,
click OK to close the Programmer dialog.
5. Select Programmer>Environment>Save to open the Save Environment dialog
FIGURE 6-2:
SAVE ENVIRONMENT DIALOG