Microchip Technology Universal Device Programmer DV007004 DV007004 User Manual
Product codes
DV007004
MPLAB
®
PM3 User’s Guide
DS51464C-page 90
© 2006 Microchip Technology Inc.
FIGURE 9-4:
ENVIRONMENT DESTINATION WINDOW
6. Select the MPLAB PM3 Card to save the Environment to the MPLAB PM3 Card,
or select another destination to save it to another location. Click OK to close the
Environment Destination window and return to the Save Environment dialog.
Environment Destination window and return to the Save Environment dialog.
7. In the Save Environment dialog, the “Destination” field will display the selected
location. Click Save to save the Environment. Click Close to close the dialog.
The Output window displays a message confirming the Environment has been
saved.
The Output window displays a message confirming the Environment has been
saved.
9.3.1.2
COPY
This option enables you to create a copy of the Environment so you can store it, use it
in another location, or create a new Environment based on this Environment.
Select Programmer>Environment>Copy to open the Copy Environment dialog
(Figure 9-5). This command copies an Environment from one location to another, for
example, from the MPLAB PM3 Card to your hard drive. Use these steps to copy an
Environment:
in another location, or create a new Environment based on this Environment.
Select Programmer>Environment>Copy to open the Copy Environment dialog
(Figure 9-5). This command copies an Environment from one location to another, for
example, from the MPLAB PM3 Card to your hard drive. Use these steps to copy an
Environment:
FIGURE 9-5:
COPY ENVIRONMENT DIALOG
Note: In order to save the Environment, the MPLAB PM3 Card must be inserted
in the programmer.