Panasonic HDC-SD9EG-K User Manual
11
VQT1N58
7
Face detection & AE button [
] (l 42)
8
PRE-REC button [PRE-REC] (l 35)
9
DC input terminal [DC IN 9.3V] (l 17)
10 Battery holder (l 15)
11 Battery release lever [BATTERY] (l 15)
12 HDMI mini connector [HDMI] (l 77, 79)
13 Disc copy button [DISC COPY] (l 85)
13 Disc copy button [DISC COPY] (l 85)
14 Power LCD Extra button
[POWER LCD EXTRA] (l 27)
15 Delete button [
] (l 68)
16 Audio-video output terminal [A/V] (l 74, 88)
≥ Use the supplied AV cable only.
17 Component terminal [COMPONENT] (l 78)
≥ Use the supplied AV cable only.
17 Component terminal [COMPONENT] (l 78)
18 USB terminal [
] (l 82, 89, 99)
19 Menu button [MENU] (l 21)
20 Built-in flash (l 51)
21 Lens (LEICA DICOMAR)
22 Lens hood
Rotate the lens hood counter-clockwise A to
remove it. In order to attach it, place into slot B,
and then rotate it clockwise C.
Rotate the lens hood counter-clockwise A to
remove it. In order to attach it, place into slot B,
and then rotate it clockwise C.
≥ Attach the MC protector or the ND filter of the
Filter Kit (VW-LF37WE; optional) in front of the
lens hood.
lens hood.
≥ When fitting the tele conversion lens
(VW-T3714H; optional) or the wide conversion
lens (VW-W3707H; optional), first remove the
lens hood.
lens (VW-W3707H; optional), first remove the
lens hood.
23 Remote control sensor (l 13)
24 Recording lamp (l 22)
25 Tripod receptacle
This is a hole for attaching the unit to the optional
tripod. (For details on mounting the tripod, refer
to the operating instructions for the tripod.)
This is a hole for attaching the unit to the optional
tripod. (For details on mounting the tripod, refer
to the operating instructions for the tripod.)
A Camera base
Lens cover A
≥The lens cover opens in
recording mode.
(l 20)
20
21
22
23
24
Be careful about the following.
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the
zoom lever is pressed toward the W side, the 4
corners of an image will be darkened.
(Vignetting)
(When fitting 2 lens accessories, first remove
the lens hood and then fit them.)
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the
zoom lever is pressed toward the W side, the 4
corners of an image will be darkened.
(Vignetting)
(When fitting 2 lens accessories, first remove
the lens hood and then fit them.)
Attaching the lens cap
(Included in the Filter Kit
(Included in the Filter Kit
(VW-LF37WE; optional))
≥ When the filter kit (VW-LF37WE; optional) is
used, protect the lens surface while the unit
is not used with the lens cap supplied with
the filter kit.
is not used with the lens cap supplied with
the filter kit.
≥ To attach or remove the lens cap, hold both
sides of the lens cap with the tips of your
finger and thumb.
finger and thumb.
25
HDCSD9EP-VQT1N58_eng.book 11 ページ ２００８年１月１０日 木曜日 午後９時３６分