Texas Instruments 600W Isolated PFC AVR Power Supply Evaluation Module UCC25600EVM-644 UCC25600EVM-644 Data Sheet
Product codes
UCC25600EVM-644
WARNING
3. Electrical Safety:
(a) De-energize the TI HV EVM and all its inputs, outputs, and electrical loads before performing any
electrical or other diagnostic measurements. Revalidate that TI HV EVM power has been safely de-
energized.
energized.
(b) With the EVM confirmed de-energized, proceed with required electrical circuit configurations, wiring,
measurement equipment hook-ups and other application needs, while still assuming the EVM circuit
and measuring instruments are electrically live.
and measuring instruments are electrically live.
(c) Once EVM readiness is complete, energize the EVM as intended.
WARNING: while the EVM is energized, never touch the EVM or its electrical circuits as they
could be at high voltages capable of causing electrical shock hazard.
could be at high voltages capable of causing electrical shock hazard.
4. Personal Safety:
(a) Wear personal protective equipment e.g. latex gloves and/or safety glasses with side shields or
protect EVM in an adequate lucent plastic box with interlocks from accidental touch.
5. Limitation for Safe Use:
(a) EVMs are not to be used as all or part of a production unit.
3
SLOU293C – June 2010 – Revised September 2012
Copyright © 2010–2012, Texas Instruments Incorporated