Texas Instruments TLV320DAC3203 Evaluation Module TLV320DAC3203EVM-K TLV320DAC3203EVM-K Data Sheet
Product codes
TLV320DAC3203EVM-K
DAC3203 Control Software
4.1.3
Control Categories
The Digital Settings, Analog Settings, and Signal Processing categories provide control of many
registers and other features of the TLV320DAC3203 . These categories are intended for the advanced
user. Hovering the mouse cursor on top of a control displays a tip strip containing page, register, and bit
information. As an example, hovering on top of the J control of the Clocks / Interface panel, as shown in
registers and other features of the TLV320DAC3203 . These categories are intended for the advanced
user. Hovering the mouse cursor on top of a control displays a tip strip containing page, register, and bit
information. As an example, hovering on top of the J control of the Clocks / Interface panel, as shown in
, displays p0_r6_b5-0, meaning that this control writes to Page 0/Register 6, Bits D5 to D0.
Figure 6. Audio Inputs Panel
Ensure that a control is compatible with the current state of the codec by comparing it with the data sheet.
As an example, some controls in the Analog Setup panel must be modified in a particular order as
described in the data sheet. Other controls must only be modified with a specific hardware setup, such as
powering up the AVDD LDO.
As an example, some controls in the Analog Setup panel must be modified in a particular order as
described in the data sheet. Other controls must only be modified with a specific hardware setup, such as
powering up the AVDD LDO.
All controls update their status with respect to the register contents in the following conditions:
•
A panel is opened.
•
The Execute Command Buffer button in the Command-Line Interface is pressed, if enabled to do
so.
so.
•
The Refresh button at the bottom right of a panel is pressed.
12
TLV320DAC3203EVM-K
SLAU441 – April 2012
Copyright © 2012, Texas Instruments Incorporated