Texas Instruments FPD Link III - DS90UB903Q & DS90UB904Q EVK SERDESUB-21USB/NOPB SERDESUB-21USB/NOPB Data Sheet

Product codes
SERDESUB-21USB/NOPB
Page of 52
 
30 
SERDESUB-21USB User’s Guide  
 
 
 
 
            
 
 
SNLU101 – April 2012 
 
Note: Please note that the following references are supplied only as a courtesy to our 
valued customers. It is not intended to be an endorsement of any particular equipment or 
supplier. 
 
Cable References 
 
The FPD-Link III interface cable included in the kit is a standard off-the-shelf high-speed 
USB 2.0 with a 4-pin USB A type on one end and a 5-pin mini USB on the other end and is 
included for demonstration purposes only.  
NOTE:  The DS9UB903Q and DS9UB904Q are NOT USB compliant and should not be 
plugged into a USB device nor should a USB device be plugged into the demo 
boards. 
The inclusion of the USB cable in the kit is for: 
1) Demonstrating the robustness of the FPD-Link III link over standard twisted pair data 
cables. 
2) Readily available and in different lengths without having custom cables made. 
 
-  For optimal performance, we recommend Shielded Twisted Pair (STP) 100ohm 
differential impedance and 24 AWG (or larger diameter) cable for high-speed data 
applications. 
 
Leoni Dacar 538 series cable:   
 
www.leoni-automotive-cables.com 
 
Rosenberger HSD connector:   
 
www.rosenberger.de/en/Products/35_Automotive_HSD.php 
 
Equipment References 
 
Corelis CAS-1000-I2C/E I2C Bus Analyzer and Exerciser Products: 
 
www.corelis.com/products/I2C-Analyzer.htm