Microchip Technology DV164136 Data Sheet
2011 Microchip Technology Inc.
DS80495E-page 1
PIC18F87J11 FAMILY
The PIC18F87J11 family devices that you have
received conform functionally to the current Device
Data Sheet (DS39778D), except for the anomalies
described in this document.
received conform functionally to the current Device
Data Sheet (DS39778D), except for the anomalies
described in this document.
The silicon issues discussed in the following pages are
for silicon revisions with the Device and Revision IDs
listed in
for silicon revisions with the Device and Revision IDs
listed in
. The silicon issues are summarized in
The errata described in this document will be
addressed in future revisions of the PIC18F87J11
family silicon.
addressed in future revisions of the PIC18F87J11
family silicon.
Data Sheet clarifications and corrections start on
,
following the discussion of silicon issues.
The silicon revision level can be identified using the
current version of MPLAB
current version of MPLAB
®
IDE and Microchip’s
programmers, debuggers and emulation tools, which
are available at the Microchip corporate web site
(www.microchip.com).
are available at the Microchip corporate web site
(www.microchip.com).
For example, to identify the silicon revision level using
MPLAB IDE in conjunction with MPLAB ICD 2 or
PICkit™ 3:
MPLAB IDE in conjunction with MPLAB ICD 2 or
PICkit™ 3:
1.
Using the appropriate interface, connect the
device to the MPLAB ICD 2 programmer/
debugger or PICkit™ 3.
device to the MPLAB ICD 2 programmer/
debugger or PICkit™ 3.
2.
From the main menu in MPLAB IDE, select
Configure>Select Device, and then select the
target part number in the dialog box.
Configure>Select Device, and then select the
target part number in the dialog box.
3.
Select the MPLAB hardware tool
(Debugger>Select Tool).
(Debugger>Select Tool).
4.
Perform a “Connect” operation to the device
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
The DEVREV values for the various PIC18F87J11
family silicon revisions are shown in
family silicon revisions are shown in
.
Note:
This document summarizes all silicon
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated in the last column of
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated in the last column of
apply to the current silicon
revision (A6) or (C2), respectively.
Note:
If you are unable to extract the silicon
revision level, please contact your local
Microchip sales office for assistance.
revision level, please contact your local
Microchip sales office for assistance.
TABLE 1:
SILICON DEVREV VALUES
Part Number
Device ID
(
)
Revision ID for Silicon Revision
(
A1
A2
A4
A5
A6
C1
C2
PIC18F66J11
444h
1h
2h
4h
5h
6h
10h
13h
PIC18F66J16
446h
PIC18F67J11
448h
PIC18F86J11
44Eh
PIC18F86J16
450h
PIC18F87J11
452h
Note 1:
The Device IDs (DEVID and DEVREV) are located at the last two implemented addresses of configuration
memory space. They are shown in hexadecimal in the format “DEVID DEVREV”.
memory space. They are shown in hexadecimal in the format “DEVID DEVREV”.
2:
Refer to the “PIC18F6XJXX/8XJXX Flash Microcontroller Programming Specification” (DS39644) for
detailed information on Device and Revision IDs for your specific device.
detailed information on Device and Revision IDs for your specific device.
PIC18F87J11 Family
Silicon Errata and Data Sheet Clarification