Microchip Technology APGDT001 User Manual
LIN Serial Analyzer User’s Guide Rev2.0
DS51675B-page 24
©
2008 Microchip Technology Inc.
3.8.1.2
DEVELOPING AND STORING MESSAGE CONTENT
To manually add message content to the “Master Frames” field:
1.
Click the Add button. A second window displays for creation of the new mes-
sage.
sage.
2.
Type the message in the text box.
3.
Click OK.
To load a pre-existing message to the “Master Frames” field:
1.
From the pull-down menus, select File>Open. The “Open” dialog box appears.
2.
In the dialog box’s list box, select the desired
*.ini
file.
3.
Click Open.
To delete some message content:
1.
In the “Master Frames” field, select the content to be deleted by doing one of the
following:
following:
• To select adjacent rows of content – Click on the first row, scroll down to the
last row and hold down <Shift> while clicking.
• To select non-adjacent rows of content – Hold down <Ctrl> while clicking each
row.
2.
Click Delete.
To edit some message content:
1.
In the “Master Frames” field, select the content line to be edited
1.
Click Edit. A second window displays to edit hte message.
2.
Make and corrections or additions to the message in the text box.
3.
Click OK
To send a message:
1.
In the “Master Frames” field, select the content to be sent by doing one of the
following:
following:
• To select adjacent rows of content – Click on the first row, scroll down to the
last row and hold down <Shift> while clicking.
• To select non-adjacent rows of content – Hold down <Ctrl> while clicking each
row.
2.
Click Send.
The highlighted message content is sent, working top-to-bottom through the
“Master Frames” field.
“Master Frames” field.
The message is sent once. (For information on continually sending the
highlighted message content, see Section 3.8.3 “Checksum Group”.)
highlighted message content, see Section 3.8.3 “Checksum Group”.)
WARNING
Importing a file into the “Master Frames” field overwrites any content that previously
had been in that field.
had been in that field.