Microchip Technology DV164139 Data Sheet
LOW PIN COUNT USB
DEVELOPMENT KIT
USER’S GUIDE
© 2009 Microchip Technology Inc.
DS41356B-page 1
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
Low Pin Count USB Development Kit. Items discussed in this chapter include:
Low Pin Count USB Development Kit. Items discussed in this chapter include:
DOCUMENT LAYOUT
This document describes how to use the Low Pin Count USB Development Kit as a
development tool to emulate and debug firmware on a target board. The manual layout
is as follows:
development tool to emulate and debug firmware on a target board. The manual layout
is as follows:
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.