Microchip Technology MCP3425EV User Manual
MCP3425 SOT23-6 EVALUATION
BOARD USER’S GUIDE
© 2009 Microchip Technology Inc.
DS51787A-page 5
Chapter 1. Quick Start Instructions
1.1
INTRODUCTION
The following sections provide an overview of the MCP3425 SOT23-6 Evaluation
Board and demonstrate how to use it with the PICkit™ Serial Analyzer
(P/N: DV164122).
Board and demonstrate how to use it with the PICkit™ Serial Analyzer
(P/N: DV164122).
The following topics are covered:
• Description of the MCP3425 SOT23-6 Evaluation Board
• Using MCP3425 SOT23-6 Evaluation Board with the PICkit Serial Analyzer to
evaluate the MCP3425 device.
1.2
DESCRIPTION OF THE MCP3425 SOT23-6 EVALUATION BOARD
The MCP3425 SOT23-6 Evaluation Board (P/N MCP3425EV) contains a MCP3425
16-bit Delta-Sigma Analog-to-Digital Converter (ADC). The MCP3425 is an 16-bit
single channel ADC device with various options. The MCP3425 SOT23-6 Evaluation
Board has analog input connection pads and V
16-bit Delta-Sigma Analog-to-Digital Converter (ADC). The MCP3425 is an 16-bit
single channel ADC device with various options. The MCP3425 SOT23-6 Evaluation
Board has analog input connection pads and V
DD
, SDA, and SCL test pads. The user
can connect any sensor input signal to this evaluation board and test the ADC
conversion results. The PICkit Serial Analyzer’s PC graphic user interface (GUI)
provides the user’s interface for configuration register bits of the MCP3425 and
displays the ADC conversion values. The PICkit Serial Analyzer links between the GUI
and the MCP3425 SOT23-6 Evaluation Board and provides the I
conversion results. The PICkit Serial Analyzer’s PC graphic user interface (GUI)
provides the user’s interface for configuration register bits of the MCP3425 and
displays the ADC conversion values. The PICkit Serial Analyzer links between the GUI
and the MCP3425 SOT23-6 Evaluation Board and provides the I
2
C communication to
the MCP3425 SOT23-6 Evaluation Board. The user also can use this MCP3425
SOT23-6 Evaluation Board without the PICkit Serial Analyzer by providing the I
SOT23-6 Evaluation Board without the PICkit Serial Analyzer by providing the I
2
C
communication signal to the SDA and SCL test pads on the board.
This evaluation board has the following interfaces:
• PICkit Serial Analyzer (P/N: DV164122) for writing configuration register bits and
reading the conversion data.
The user can monitor the I
2
C
communications by connecting an oscilloscope to the
SDA and SCL test pads. Refer to Appendix A. “Schematic and Layouts”.
Note:
The user can use this board without the PICkit Serial Analyzer as long as
the V
the V
DD
, SCL, and SDA are provided to the board. This evaluation board
does not include MCU.