Microchip Technology AC162087 Data Sheet

Page of 88
 2006-2012 Microchip Technology Inc.
DS51292U-page  1
Processor Extension Pak and Header Specification
This chapter contains the following:
PROCESSOR EXTENSION PAK AND HEADER DEFINED
A header (or debug header) is a circuit board that allows an emulator or debugger to 
debug code for a specific device. A special version of the device with on-board debug 
circuitry is located on the header. Connectors on the side of the header allow it to con-
nect directly or through an adaptor to the debug tool. Connectors on the bottom of the 
header allow it to connect directly, or through a transition socket, to a target board.
A processor extension pak contains a header, adaptor board, and stand-offs.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and 
documentation are constantly evolving to meet customer needs, so some actual dialogs 
and/or tool descriptions may differ from those in this document. Please refer to our web site 
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each 
page, in front of the page number. The numbering convention for the DS number is 
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the 
document.
For the most up-to-date information on development tools, see the MPLAB
®
 IDE or MPLAB X 
IDE online Help (Help menu).