Microchip Technology DM182015-1 User Manual

DS70654B-page 16

© 2011-2012 Microchip Technology Inc.

5.

Ensure that the jumper is disconnected at JP1 position on the LCD Serial 
Accessory Board. This ensures that the LCD Serial Accessory Board is used in 
I

2

C mode and not in SPI mode. The 8-bit WDK Demo program uses the LCD 

Serial Accessory board in I

2

C mode.

6.

Wireless demo board can be powered using any of these options:

• Two AA Batteries

• 9V External Power Supply

• USB port

• External 3.0-3.6V power source through test points TP301and TP302

7.

Insert a jumper at either JP302 or JP303 (Current Measure) on the PIC18 
Wireless Development Board.

The pre-programmed demo is used to demonstrate the basic concepts of the MiWi 
networking and also to demonstrate the features of the 8-bit Wireless Development Kit. 

 illustrates the 8-bit Wireless Development Kit program flow.