Microchip Technology DM330021-2 Data Sheet
dsPICDEM™ MCLV-2 DEVELOPMENT
BOARD USER’S GUIDE
2012 Microchip Technology Inc.
DS52080A-page 7
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
dsPICDEM™ MCLV-2 Development Board. Items discussed in this chapter include:
dsPICDEM™ MCLV-2 Development Board. Items discussed in this chapter include:
•
•
•
•
•
•
•
•
DOCUMENT LAYOUT
This user’s guide describes how to use the dsPICDEM™ MCLV-2 Development Board.
The document is organized as follows:
The document is organized as follows:
•
Development Board and provides an overview of various features.
•
– This chapter describes the hardware
components of the dsPICDEM™ MCLV-2 Development Board.
•
– This
chapter describes how to run a sensored BLDC motor using a dsPIC
®
DSC
device.
•
circuit schematics of the dsPICDEM™ MCLV-2 Development Board.
•
output ratings for the dsPICDEM™ MCLV-2 Development Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs and/
or tool descriptions may differ from those in this document. Please refer to our web site
(
documentation are constantly evolving to meet customer needs, so some actual dialogs and/
or tool descriptions may differ from those in this document. Please refer to our web site
(
www.microchip.com
) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.