Microchip Technology AC164133 Data Sheet
Buck/Boost Converter PICtail™ Plus Daughter Board User’s Guide
DS70336A-page 38
© 2008 Microchip Technology Inc.
3.4
PROGRAMMING THE DEVICE
The MPLAB ICD 2 In-Circuit Debugger can be used to program and debug the
dsPIC33FJ16GS502 device in-circuit on the Daughter Board.
dsPIC33FJ16GS502 device in-circuit on the Daughter Board.
3.4.1
Setting up the Device Configuration
1.
Select Configure>Configuration Bits from MPLAB IDE to display the
configuration settings, as shown in Figure 3-13. The Configuration Bits window
appears, as shown in Figure 3-14.
configuration settings, as shown in Figure 3-13. The Configuration Bits window
appears, as shown in Figure 3-14.
FIGURE 3-13:
CONFIGURATION MENU
2.
Set the Configuration bits as highlighted in Figure 3-14.
FIGURE 3-14:
CONFIGURATION SETTINGS
Note:
Before proceeding, ensure that the USB driver for the MPLAB ICD 2 is
installed on your PC. Refer to the “MPLAB
installed on your PC. Refer to the “MPLAB
®
ICD 2 In-Circuit Debugger
User’s Guide” (DS51331) for details.