Microchip Technology SC70EV User Manual
SC70-6 AND SOT-23-6/8 TO DIP-8
EVALUATION BOARD USER’S GUIDE
© 2009 Microchip Technology Inc.
DS51874A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
SC70-6 and SOT-23-6/8 to DIP-8 Evaluation Board. Items discussed in this chapter
include:
• Document Layout
• Conventions Used in this Guide
• The Microchip Web Site
• The Microchip Web Site
• Customer Support
• Document Revision History
SC70-6 and SOT-23-6/8 to DIP-8 Evaluation Board. Items discussed in this chapter
include:
• Document Layout
• Conventions Used in this Guide
• The Microchip Web Site
• The Microchip Web Site
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the SC70-6 and SOT-23-6/8 to DIP-8 Evaluation
Board as a development tool to emulate and debug firmware on a target board. The
manual layout is as follows:
• Chapter 1. “Product Overview” – Important information about the SC70-6 and
Board as a development tool to emulate and debug firmware on a target board. The
manual layout is as follows:
• Chapter 1. “Product Overview” – Important information about the SC70-6 and
SOT-23-6/8 to DIP-8 Evaluation Board.
• Chapter 2. “Installation and Operation” – Includes instructions on how to get
started with this evaluation board.
• Appendix A. “Schematic and Layouts” – Shows the schematic and layout
diagrams for the SC70-6 and SOT-23-6/8 to DIP-8 Evaluation Board.
• Appendix B. “Bill of Materials (BOM)” – Lists the parts used to build the SC70-6
and SOT-23-6/8 to DIP-8 Evaluation Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.