Microchip Technology MA330031 Data Sheet

 2012 Microchip Technology Inc.

DS52086A-page  1

The dsPIC33EP256MC506 External Op Amp Motor 
Control PIM is designed to demonstrate the 
capabilities of the dsPIC33EP256MC506 motor 
control device, using external on-board op amps 
with development boards, such as the dsPICDEM™ 
MCLV-2 Development Board (DM330021-2) and 
the dsPICDEM MCHV-2 Development Board
(DM330023-2), which support 100-pin PIM 
interfaces.
The dsPIC33EP256MC506 is a high-performance, 16-bit 
Digital Signal Controller (DSC) in a 64-pin TQFP 
package.
To operate this PIM with the dsPICDEM MCLV-2 and 
dsPICDEM MCHV-2 Development Boards, please insert 
the External Op Amp Configuration Board into the 
header, J4, (for the dsPICDEM MCHV-2 Development 
Board) or header, J14 (for the dsPICDEM MCLV-2 
Development Board).

 shows the connection location for the 

dsPICDEM MCHV-2 Development Board.

 provides information on the hardware versions 

of the motor control boards that are compatible with this 
PIM. Refer to the user’s guide for the specific motor 
control board for hardware version identification 
information.

dsPICDEM™ MCHV Development Board

DM330023

Not compatible

dsPICDEM™ MCLV Development Board 

DM330021

Not compatible

dsPICDEM™ MCSM Development Board

DM330022

Not compatible

dsPICDEM™ MCHV-2 Development Board

DM330023-2

All revisions

dsPICDEM™ MCLV-2 Development Board

DM330021-2

All revisions

Warning: Do not connect non-isolated oscilloscope probes to the test points on the dsPIC33EP256MC506 External 

Op Amp Motor Control PIM while using the PIM with the dsPICDEM™ MCHV-2 Development Board. Use 
a high-voltage differential probe, rated in excess of 600 V

RMS

 (Common mode). Failure to heed this warning 

could result in hardware damage.