Microchip Technology MCP6XXXEV-AMP4 User Manual
MCP6XXX Amplifier Evaluation Board 4 User’s Guide
DS51681A-page 6
© 2007 Microchip Technology Inc.
1.3
MCP6XXX AMPLIFIER EVALUATION BOARD 4 DESCRIPTION
MCP6XXX Amplifier Evaluation Board 4 is intended to support the inverting integrator
circuit.
The MCP6XXX Amplifier Evaluation Board 4 has the following features:
• All amplifier resistors and capacitors are socketed
• Supports all Microchip single op amps
circuit.
The MCP6XXX Amplifier Evaluation Board 4 has the following features:
• All amplifier resistors and capacitors are socketed
• Supports all Microchip single op amps
- PDIP-8 package (e.g., MCP6021) are socketed
- SOIC-8 package can be accomodated; see Section 2.4.3 “Amplifier
- SOIC-8 package can be accomodated; see Section 2.4.3 “Amplifier
• Test points for connecting lab equipment
• Single supply configuration
Figure 1-2 shows the block diagram of the MCP6XXX Amplifier Evaluation Board 4.
Lab equipment can be attached (via test points) to measure the amplifier response.
• Single supply configuration
Figure 1-2 shows the block diagram of the MCP6XXX Amplifier Evaluation Board 4.
Lab equipment can be attached (via test points) to measure the amplifier response.
FIGURE 1-2:
MCP6XXX Amplifier Evaluation Board 4 Block Diagram.
Amplifier
Signal Inputs
and
Test Points
(Op Amp, Resistors and
Power Supply
and
Test Point
Signal Output
and
Test Points
Non-Inverting
Comparator
Block
Capacitors)