Microchip Technology ADM00375 User Manual
MCP6H04 Evaluation Board User’s Guide
DS52005A-page 12
© 2011 Microchip Technology Inc.
The power supply voltage needs to be in the allowed range for the op amp. The
MCP6H04 device supports a maximum of 16V power supply. The power supply is
protected by a Zener diode with a nominal voltage of 16V and bypassed by a 1 µF
capacitor (see Figure 2-3).
MCP6H04 device supports a maximum of 16V power supply. The power supply is
protected by a Zener diode with a nominal voltage of 16V and bypassed by a 1 µF
capacitor (see Figure 2-3).
The mid-supply reference voltage consists of a voltage divider and a buffer amplifier
(see
(see
The resistors that are part of the amplifier are placed in pin sockets, which are labeled.
All component labels on board are consistent with those on the schematic. The op amp
on board is a 14-lead SOIC package, and is bypassed by a 0.1 µF capacitor.
on board is a 14-lead SOIC package, and is bypassed by a 0.1 µF capacitor.
The
test points for the power supply, ground, input signals, output signals, and voltage
reference allow lab equipment to be connected to the board. The MCP6H04 Evaluation
Board top view is shown in Figure 2-2.
Board top view is shown in Figure 2-2.
FIGURE 2-2:
MCP6H04 Evaluation Board Top View.