Microchip Technology AC162070 Data Sheet
MPLAB
®
ICD 2
DS51292L-page 6
©
2005 Microchip Technology Inc.
PROGRAMMING NON-ICD DEVICES
The MPLAB ICD 2 header can only program the -ICD device, not the regular device.
To program non-ICD devices with the MPLAB ICD 2, use the Universal Programming
Module (AC162049) or design a modular interface connector on the target. See the
appropriate specification for connections. For the most up-to-date device programming
specifications, see the Microchip website (www.microchip.com).
To program non-ICD devices with the MPLAB ICD 2, use the Universal Programming
Module (AC162049) or design a modular interface connector on the target. See the
appropriate specification for connections. For the most up-to-date device programming
specifications, see the Microchip website (www.microchip.com).
CALIBRATION BITS
The calibration bits for the band gap and internal oscillator are always preserved by the
MPLAB ICD 2 to their factory settings.
MPLAB ICD 2 to their factory settings.
MPLAB ICD 2 PERFORMANCE
The PICmicro
®
MCU devices do not support partial program memory erase; therefore,
users may experience slower MPLAB ICD 2 performance than with other devices.
ADDITIONAL INFORMATION
Please refer to the MPLAB
®
ICD 2 In-Circuit Debugger User’s Guide (DS51331),
MPLAB IDE Help and the MPLAB ICD 2 Readme for additional information.
SCHEMATICS
The following schematics show header electrical connections.