Microchip Technology DM164130-3 Information Guide

   

■

Integrated MAC and 

10 Base-T PHY

   

■

8 KB transmit/ 

receive buffer SRAM

   

■

MCU Interface 

Supported: SPI

   

■

Available in 28-pin 

SPDIP, SSOP, SOIC 

and QFN packages

   

■

Pre-programmed EUI-48™  

and EUI-64™ node address

   

■

Up to 1.5 Kb Serial EEPROM 

functionality 

SPI: 25AA02E48 

I

2

C™: 24AA02E48 

UNI/O®: 11AA02E48 

www.microchip.com/MAC

This Ethernet development board supports 

both the ENC28J60 controller and the 

PIC18F97J60 MCU. With this board and 

Microchip’s free TCP/IP stack, a web server 

can be developed showcasing the capability to remotely 

monitor and control embedded applications over the Internet.

Contains everything needed to develop 

Ethernet or USB peripheral/Host/OTG 

applications using the PIC32. The kit 

contains free Microchip TCP/IP software 

and the necessary cables. There is an 

integrated debugger/programmer on the board as well as 

an expansion connector.

Populated with the ENC624J600, 

this Ethernet board interfaces to the 

RJ-45 connector. It can be plugged into 

the Explorer 16 development board 

(DM240001) and the PIC18 Explorer board 

(DM183032) allowing connection to any of Microchip’s 

8-, 16- and 32-bit products.

This board is populated with the 28-pin 

ENC28J60 Ethernet controller which 

interfaces to the RJ-45 connector. It can be 

plugged into the Explorer 16 development 

board (DM240001), allowing connection 

to any of Microchip’s 16- and 32-bit products when used in 

conjunction with the free Microchip TCP/IP stack.

10 Mbps

Ethernet

TX/RX

Buffer

PHY

SPI

MAC

A wide range of remote communication features are 

possible when Ethernet connectivity is added to embedded 

designs. For example, systems can be remotely monitored 

using a web browser or email notification can be sent; 

triggered by service alerts or low product inventory. End 

users benefit through cost and time savings since they 

can centrally monitor, control and service their embedded 

systems over the Internet instead of physically being there.
Microchip’s Ethernet solutions address the growing 

demand for embedded Ethernet products, enabling easy 

network connectivity for cost-sensitive embedded designs.

   

■

Free and robust TCP/IP stack optimized for the PIC18, 

PIC24 and PIC32 microcontroller and dsPIC digital 

signal controller families

   

■

Supported protocols include: HTTP, SMTP, SNMP, FTP, 

SNTP, SSL, TCP, UDP, IP, DHCP, DDNS, ICMP and ARP

   

■

PIC18F microcontroller with built-in Ethernet MAC  

and 10 Base-T PHY

   

■

8 KB dedicated Ethernet Buffer RAM

   

■

Up to 128 KB Flash

   

■

Advanced analog and communication peripherals

   

■

Available in 64-, 80- and 100-pin TQFP

   

■

Integrated 10/100 Mbit 

Ethernet MAC

   

■

Dedicated DMA interface 

for direct access to the 

entire system RAM

   

■

Industry standard RMII/

MII interface to PHY

   

■

Pre-programmed  

MAC address

   

■

80 MHz, up to 512 KB 

Flash, up to 128 KB RAM

   

■

Available in 64-pin (TQFP, QFN) and 100-pin (TQFP, BGA)

   

■

Integrated MAC and 

10/100 Base-T PHY

   

■

24 KB transmit/

receive buffer SRAM

   

■

MCU Interface 

supported: SPI and 

8/16-bit parallel

   

■

Cryptographic 

Security Engines

   

■

Pre-programmed 

unique MAC address

   

■

Available in 44-pin (TQFP, QFN) and 64-pin (TQFP)

10/100 Mbps

Ethernet

TX/RX

Buffer

MAC

PHY

SPI/Parallel Interfac

e

Security

Engines

Offering the World's Smallest Embedded Ethernet Controller

Connectivity Solutions