Microchip Technology DM300024 Data Sheet
dsPIC30F Demonstration Program Operation
©
2006 Microchip Technology Inc.
DS70099D-page 31
You can also display the data acquisition values on the communications HyperTerminal
on your PC. Use a DB-9 cable to connect “J2 – PORT A” on the development board to
the RS-232 serial port on the PC, as shown in Figure 3-4.
on your PC. Use a DB-9 cable to connect “J2 – PORT A” on the development board to
the RS-232 serial port on the PC, as shown in Figure 3-4.
FIGURE 3-4:
dsPICDEM™ 1.1 PLUS DEVELOPMENT BOARD TO PC
CONNECTION
CONNECTION
After connecting the table, configure HyperTerminal for the port settings shown in
Figure 3-5. HyperTerminal will show a composite display of the data acquisition values
at an update rate of 1.14 seconds.
Figure 3-5. HyperTerminal will show a composite display of the data acquisition values
at an update rate of 1.14 seconds.
FIGURE 3-5:
HYPERTERMINAL CONFIGURATION SETTINGS
To return to the Menu Options display after running the Data Acquisition demo, press
switch SW1.
switch SW1.
J2
RS-232
Port
Port
DB-9 Cable
Development Board
PC