Microchip Technology MA330028 Data Sheet
2011-2014 Microchip Technology Inc.
DS80000533H-page 1
dsPIC33EPXXXGP50X,
dsPIC33EPXXXMC20X/50X
and PIC24EPXXXGP/MC20X
The dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X
and PIC24EPXXXGP/MC20X family devices that you
have received conform functionally to the current Device
Data Sheet (DS70000657H), except for the anomalies
described in this document.
and PIC24EPXXXGP/MC20X family devices that you
have received conform functionally to the current Device
Data Sheet (DS70000657H), except for the anomalies
described in this document.
The silicon issues discussed in the following pages are
for silicon revisions with the Device and Revision IDs
listed in
for silicon revisions with the Device and Revision IDs
listed in
. The silicon issues are summarized in
The errata described in this document will be
addressed in future revisions of
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X
and PIC24EPXXXGP/MC20X silicon.
addressed in future revisions of
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X
and PIC24EPXXXGP/MC20X silicon.
Data Sheet clarifications and corrections start on
, following the discussion of silicon issues.
The silicon revision level can be identified using the
current version of MPLAB
current version of MPLAB
®
IDE and Microchip’s
programmers, debuggers and emulation tools, which
are available at the Microchip corporate web site
(
are available at the Microchip corporate web site
(
www.microchip.com
).
For example, to identify the silicon revision level using
MPLAB IDE in conjunction with MPLAB ICD 3 or
PICkit™ 3:
MPLAB IDE in conjunction with MPLAB ICD 3 or
PICkit™ 3:
1.
Using the appropriate interface, connect the device
to the MPLAB ICD 3 programmer/debugger or
PICkit 3.
to the MPLAB ICD 3 programmer/debugger or
PICkit 3.
2.
From the main menu in MPLAB IDE, select
Configure>Select Device, and then select the
target part number in the dialog box.
Configure>Select Device, and then select the
target part number in the dialog box.
3.
Select the MPLAB hardware tool
(Debugger>Select Tool).
(Debugger>Select Tool).
4.
Perform a “Connect” operation to the device
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
The Device and Revision ID values for the various
silicon revisions are shown in
silicon revisions are shown in
Note:
This document summarizes all silicon
errata issues from all revisions of silicon,
previous as well as current. The current
silicon revision levels are:
errata issues from all revisions of silicon,
previous as well as current. The current
silicon revision levels are:
dsPIC33/PIC24EP32: A3
dsPIC33/PIC24EP32: A3
dsPIC33/PIC24EP64: A2, A3, A8
dsPIC33/PIC24EP128: A3, A8
dsPIC33/PIC24EP256: A3
dsPIC33/PIC24EP512: A7
“N/A” indicates that the device family is
not released, or that the particular silicon
issue does not apply to this family.
“N/A” indicates that the device family is
not released, or that the particular silicon
issue does not apply to this family.
Note:
If you are unable to extract the silicon
revision level, please contact your local
Microchip sales office for assistance.
revision level, please contact your local
Microchip sales office for assistance.
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X and
PIC24EPXXXGP/MC20X Family Silicon Errata and Data Sheet Clarification