Microchip Technology MA330018 Data Sheet

© 2007-2012 Microchip Technology Inc.

DS70291G-page  1

• 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS

• 2% internal oscillator
• Programmable PLL and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer
• Low-power management modes
• Fast wake-up and start-up

• Up to 40 MIPS 16-bit dsPIC33F CPU
• Two 40 bit wide accumulators 
• Single-cycle (MAC/MPY) with dual data fetch 
• Single-cycle MUL plus hardware divide

• Up to four PWM generators with eight outputs
• Dead Time for rising and falling edges 
• 25 ns PWM resolution
• PWM support for Motor Control: BLDC, PMSM, ACIM, 

and SRM

• Programmable Fault inputs
• Flexible trigger for ADC conversions and configurations

• 10/12-bit ADC with 1.1Msps/500 ksps conversion rate:

- Up to nine ADC input channels and four S&H
- Flexible/Independent trigger sources

• 150 ns Comparators:

- Up to two Analog Comparator modules
- 4-bit DAC with two ranges for Analog Comparators 

• Software remappable pin functions
• 5V-tolerant pins
• Selectable open drain and internal pull-ups
• Up to 5 mA overvoltage clamp current/pin
• Multiple external interrupts

• Cyclic Redundancy Check (CRC) module
• 16-bit dual channel 100 ksps Audio DAC
• Up to five 16-bit and up to two 32-bit Timers/Counters
• Up to four Input Capture (IC) modules
• Up to four Output Compare (OC) modules
• Up to two Quadrature Encoder Interface (QEI) modules
• Real-Time Clock and Calendar (RTCC) module

• Parallel Master Port (PMP)
• Two UART modules (10 Mbps)

- Supports LIN 2.0 protocols
- RS-232, RS-485, and IrDA

®

 support

• Two 4-wire SPI modules (15 Mbps)
• Enhanced CAN (ECAN) module (1 Mbaud) with 2.0B 

support

• I

2

C module (100K, 400K and 1Mbaud) with SMbus 

support

• 8-channel hardware DMA with no CPU stalls or 

overhead

• UART, SPI, ADC, ECAN, IC, OC, INT0

• AEC-Q100 REVG (Grade 0 -40ºC to +150ºC) 
• Class B Safety Library, IEC 60730, VDE certified

• In-circuit and in-application programming
• Two program breakpoints
• Trace and run-time watch

28

28

28

44

44

21

21

21

35

35

.100”

1.27

0.65

0.65

0.80

.285x.135x1.365”

7.50x2.05x17.9

6x6x0.9

8x8x0.9

10x10x1

Note: All dimensions are in millimeters (mm) unless specified.