Microchip Technology DV164039 Data Sheet
PIC24FJ256DA210 Development Board User’s Guide
DS51911A-page 20
2010 Microchip Technology Inc.
Upon completing this tutorial, you should be able to:
• Load an existing project in MPLAB IDE
• Assemble and link the loaded project
• Debug the loaded project
• Program the PIC24FJ256DA210 with MPLAB REAL ICE in-circuit emulator or
MPLAB ICD 3.
3.3
LOADING THE PROJECT
After installing the Microchip Graphics Library and the Demo Applications that are
released with the library, load one of the demo applications to MPLAB IDE:
released with the library, load one of the demo applications to MPLAB IDE:
1.
Launch MPLAB IDE.
2.
Close any workspace that might be open (File > Close Workspace).
3.
From the Project menu, select Open.
4.
Browse through the directories to get to one of the several demo applications. The
factory pre-programmed application is located in the path: C:\Microchip
Solutions\Graphics MultiApp Demo\GMAP USB Demo PIC24.mcp
factory pre-programmed application is located in the path: C:\Microchip
Solutions\Graphics MultiApp Demo\GMAP USB Demo PIC24.mcp
.
Click Open.
FIGURE 3-1:
LOADING THE PROJECT
5.
From the Configure menu, choose Select Device.
6.
From the Device drop down list, select “PIC24FJ256DA210” (Figure 3-2). Click
OK to select the device. The loaded project will be set to use MPLAB C30 compiler.
OK to select the device. The loaded project will be set to use MPLAB C30 compiler.