Microchip Technology MA330017 Data Sheet

© 2007-2012 Microchip Technology Inc.

DS70283K-page 1

• 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS

• Code-efficient (C and Assembly) architecture
• Two 40-bit wide accumulators
• Single-cycle (MAC/MPY) with dual data fetch
• Single-cycle mixed-sign MUL plus hardware divide

• 2% internal oscillator
• Programmable PLLs and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer (WDT)
• Fast wake-up and start-up

• Low-power management modes (Sleep, Idle, Doze)
• Integrated Power-on Reset and Brown-out Reset
• 1.35 mA/MHz dynamic current (typical)
• 55 μA IPD current (typical)

• Up to four PWM pairs with independent timing
• Dead time for rising and falling edges
• 12.5 ns PWM resolution
• PWM support for:

- DC/DC, AC/DC, Inverters, PFC, Lighting
- BLDC, PMSM, ACIM, SRM

• Programmable Fault inputs
• Flexible trigger configurations for ADC conversions

• ADC module:

- Configurable as 10-bit, 1.1 Msps with four 

S&H or 12-bit, 500 ksps with one S&H

• Six analog inputs on 28-pin devices and up to 

nine analog inputs on 44-pin devices

• Flexible and independent ADC trigger sources

• Three 16-bit timers/counters. Can pair up two to 

make one 32-bit.

• Two Output Capture modules configurable as 

timers/counters

• Four Input Capture modules
• Peripheral Pin Select (PPS) to allow function 

remap

• One UART module (10 Mbps)
• With support for LIN 2.0 protocols and IrDA

®

• One 4-wire SPI module (15 Mbps)
• One I

2

C™ module (up to 1 Mbaud) with SMBus 

support

• PPS to allow function remap

• Sink/Source up to 10 mA (pin specific) for stan-

dard VOH/VOL, up to 16 mA (pin specific) for 
non-standard VOH1

• 5V-tolerant pins
• Selectable open drain, pull-ups, and pull-downs
• Up to 5 mA overvoltage clamp current
• External interrupts on all I/O pins

• AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
• Class B Safety Library, IEC 60730

• In-circuit and in-application programming
• Two program and two complex data breakpoints
• IEEE 1149.2-compatible (JTAG) boundary scan
• Trace and run-time watch

28

28

28

28

44

44

.100''

1.27

0.65

0.65

0.65

0.80

21

21

21

21

35

35

1.365x.285x.135''

17.9xx7.50x2.05

10.2x5.3x1.75

6x6x0.9

8x8x0.9

10x10x1

Note: All dimensions are in millimeters (mm) unless specified.