Microchip Technology TPG100005 User Manual
ICP
Family User’s Manual
Rev: 4.7.3 Jan-2011 Page 7 of 18
Insert ICP family CD in the CD-ROM drive. An opening screen appears
Click "Install ICP for Windows" and follow the on-screen instructions
If the opening screen does not appear:
Double-click on the "My Computer" icon
Double-click the icon for your CD-ROM drive
Double-
click “IcpSetupWithDll.exe”
7.1.2
Preliminary Hardware Installation
Connect the programmer to its power supply (not required for ICP2-Portable)
Connect RS-232 or USB cable between PC and the programmer
Install USB driver according to
“ICP2 USB Driver Installation” manual
NOTE: USB driver installation is not required for operation with RS-232 port
7.2
ICP2-GANG Setup
Install ICP2-GANG according to
“ICP2-GANG Quick Start” manual
7.3
ICP2-Portable Setup
Install ICP2-Portable according to
“ICP2-Portable Quick Start” manual
7.4
ICP2/ICP2(HC) Software Setup
7.4.1
Run
”ICP_Win.exe” Program
Double-click "ICP_Win" icon
Press “Yes” if message “Newer firmware is available. Upgrade now?” appears
7.4.2
Run “Programmer/Quick Start Wizard” and follow the Wizard
8 Plug-in to MPLAB® IDE
ICP2-GANG and ICP2/ICP2(HC) programmers are integrated into Microchip MPLAB® IDE.
Press “Yes” during software installation after the following message appears “Do you want to install ICP
Plug-in for MPLAB?
Press “Yes” during software installation after the following message appears “Do you want to install ICP
Plug-in for MPLAB?
”