Microchip Technology ADM00352 Data Sheet

 2011-2013 Microchip Technology Inc.

DS20005004C-page 1

• Up to 96% Typical Efficiency

• Input Voltage Range: 

- 4.0V to 30V (MCP16301)

- 4.7V to 36V (MCP16301H)

• Output Voltage Range: 2.0V to 15V

• 2% Output Voltage Accuracy

• Integrated N-Channel Buck Switch: 460 m



• 600 mA Output Current

• 500 kHz Fixed Frequency

• Adjustable Output Voltage

• Low Device Shutdown Current

• Peak Current Mode Control

• Internal Compensation

• Stable with Ceramic Capacitors

• Internal Soft-Start

• Cycle-by-Cycle Peak Current Limit

• Undervoltage Lockout (UVLO): 3.5V

• Overtemperature Protection

• Available Package: SOT-23-6

• PIC

®

/dsPIC

®

 Microcontroller Bias Supply

• 24V Industrial Input DC-DC Conversion

• Set-Top Boxes

• DSL Cable Modems

• Automotive

• Wall Cube Regulation

• SLA Battery-Powered Devices

• AC-DC Digital Control Power Source

• Power Meters

• D

2

 Package Linear Regulator Replacement

- See 

• Consumer

• Medical and Health Care

• Distributed Power Supplies

The MCP16301/H devices are highly integrated,
high-efficiency, fixed-frequency, step-down DC-DC
converters in a popular 6-pin SOT-23 package that
operates from input voltage sources up to 36V.
Integrated features include a high-side switch,
fixed-frequency Peak Current Mode Control, internal
compensation, peak current limit and overtemperature
protection. Minimal external components are
necessary to develop a complete step-down DC-DC
converter power supply. 

High converter efficiency is achieved by integrating the
current-limited, low-resistance, high-speed N-Channel
MOSFET and associated drive circuitry. High
switching frequency minimizes the size of external
filtering components, resulting in a small solution size.

The MCP16301/H devices can supply 600 mA of
continuous current while regulating the output voltage
from 2.0V to 15V. An integrated, high-performance
peak current mode architecture keeps the output
voltage tightly regulated, even during input voltage
steps and output current transient conditions that are
common in power systems.

The EN input is used to turn the device on and off.
While turned off, only a few micro amps of current are
consumed from the input for power shedding and load
distribution applications.

Output voltage is set with an external resistor divider.
The MCP16301/H devices are offered in a
space-saving SOT-23-6 surface mount package.

6-Lead SOT-23

1

2

3

4

5

6

SW

V

IN

EN

BOOST

GND

V

FB