Manualsbrain.com
  1. Manuals
  2. Brands
  3. Microchip Technology
  4. PICkit 3 Starter Kit DV164130
  5. User Manual

Microchip Technology PICkit 3 Starter Kit DV164130 DV164130 User Manual

Product codes
DV164130
Download
Page of 98
PICkit™ 3 User’s Guide
DS51795A-page 44
© 2009 Microchip Technology Inc.
PK3Err0047: Bootloader download failed.
PK3Err0052: The current PICkit 3 hardware version %x, is out of date. This 
version of MPLAB IDE will support only version %x or higher.
Did you click Cancel when asked to download the latest firmware? If so, you will 
need to download it now. Select Debugger>Settings, Configuration tab, and 
click Manual Download. Select the highest number .jam file and click Open.
PK3Err0053: Unable to get PICkit 3 protocol versions.
PK3Err0054: MPLAB IDE's PICkit 3 protocol definitions are out of date. You must 
upgrade MPLAB IDE to continue.
Find the latest MPLAB IDE at www.microchip.com.
PK3Err0055: Unable to set firmware suite version.
PK3Err0056: Unable to get voltages from PICkit 3.
PK3Err0068: Failed while writing to boot FLASH memory.
PK3Err0069: Failed while reading boot FLASH memory.
PK3Err0070: Failed while writing peripheral memory.
PK3Err0071: Failed while reading peripheral memory.
PK3Err0073: Device is code protected.
The device on which you are attempting to operate (read, program, blank check 
or verify) is code protected, i.e., the code cannot be read or modified. Check your 
Configuration bits setting for code protection.
To disable code protection, set or clear the appropriate Configuration bits in code 
or in the Configuration Bits window (Configure>Configuration Bits), according to 
the device data sheet. Then erase and reprogram the entire device.
PK3Err0075: Unable to set power.
PICkit 3 cannot supply power to the target.
PK3Err0080: Failed setting shadow bit(s).
8.3
GENERAL CORRECTIVE ACTIONS
These general corrective actions may solve your problem: