Microchip Technology MA330019 Data Sheet
© 2007-2012 Microchip Technology Inc.
DS70291G-page 305
dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 AND dsPIC33FJ128MCX02/X04
24.2
Comparator Control Register
REGISTER 24-1:
CMCON: COMPARATOR CONTROL REGISTER
R/W-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
CMIDL
—
C2EVT
C1EVT
C2EN
C1EN
C2OUTEN
(1)
C1OUTEN
(2)
bit 15
bit 8
R-0
R-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
C2OUT
C1OUT
C2INV
C1INV
C2NEG
C2POS
C1NEG
C1POS
bit 7
bit 0
Legend:
R = Readable bit
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
CMIDL: Stop in Idle Mode bit
1 = When device enters Idle mode, module does not generate interrupts. Module is still enabled
0 = Continue normal module operation in Idle mode
1 = When device enters Idle mode, module does not generate interrupts. Module is still enabled
0 = Continue normal module operation in Idle mode
bit 14
Unimplemented: Read as ‘0’
bit 13
C2EVT: Comparator 2 Event bit
1 = Comparator output changed states
0 = Comparator output did not change states
1 = Comparator output changed states
0 = Comparator output did not change states
bit 12
C1EVT: Comparator 1 Event bit
1 = Comparator output changed states
0 = Comparator output did not change states
1 = Comparator output changed states
0 = Comparator output did not change states
bit 11
C2EN: Comparator 2 Enable bit
1 = Comparator is enabled
0 = Comparator is disabled
1 = Comparator is enabled
0 = Comparator is disabled
bit 10
C1EN: Comparator 1 Enable bit
1 = Comparator is enabled
0 = Comparator is disabled
1 = Comparator is enabled
0 = Comparator is disabled
bit 9
C2OUTEN: Comparator 2 Output Enable bit
(1)
1 = Comparator output is driven on the output pad
0 = Comparator output is not driven on the output pad
0 = Comparator output is not driven on the output pad
bit 8
C1OUTEN: Comparator 1 Output Enable bit
(2)
1 = Comparator output is driven on the output pad
0 = Comparator output is not driven on the output pad
0 = Comparator output is not driven on the output pad
bit 7
C2OUT: Comparator 2 Output bit
When C2INV = 0:
1 = C2 V
When C2INV = 0:
1 = C2 V
IN
+ > C2 V
IN
-
0 = C2 V
IN
+ < C2 V
IN
-
When C2INV = 1:
0 = C2 V
0 = C2 V
IN
+ > C2 V
IN
-
1 = C2 V
IN
+ < C2 V
IN
-
Note 1: If C2OUTEN = 1, the C2OUT peripheral output must be configured to an available RPx pin. See
2: If C1OUTEN = 1, the C1OUT peripheral output must be configured to an available RPx pin. See