Microchip Technology MA330024 Data Sheet

 2009-2014 Microchip Technology Inc.

DS7000591F-page 1

• 3.0V to 3.6V, -40ºC to +85ºC, DC to 50 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS

• Code-Efficient (C and Assembly) Architecture
• Two 40-Bit Wide Accumulators
• Single-Cycle (MAC/MPY) with Dual Data Fetch
• Single-Cycle Mixed-Sign MUL plus Hardware Divide
• 32-Bit Multiply Support

• ±1% Internal Oscillator
• Programmable PLLs and Oscillator Clock Sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer (WDT)
• Fast Wake-up and Start-up

• Low-Power Management modes (Sleep, Idle, Doze)
• Integrated Power-on Reset and Brown-out Reset
• 1.7 mA/MHz Dynamic Current (typical)
• 50  µA  I

PD

 Current (typical)

• Up to 9 PWM Pairs with Independent Timing
• Dead Time for Rising and Falling Edges 
• 1.04 ns PWM Resolution
• PWM Support for:

- DC/DC, AC/DC, Inverters, PFC, Lighting
- BLDC, PMSM, ACIM, SRM

• Programmable Fault Inputs
• Flexible Trigger Configurations for ADC Conversions

• High-Speed ADC module:

- 10-bit resolution with up to two Successive 

Approximation Register (SAR) converters 
(up to 4 Msps)

- Up to 24 input channels grouped into 

12 conversion pairs plus two voltage reference 
monitoring inputs

- Dedicated result buffer for each analog channel

• Flexible and Independent ADC Trigger Sources
• Up to 4 High-Speed Comparators with Direct 

Connection to the PWM module:
- 10-bit Digital-to-Analog Converter (DAC) for each 

comparator

- DAC reference output
- Programmable references with 1024 voltage points

• Six General Purpose Timers:

- Five 16-bit and up to two 32-bit timers/counters

• Four Output Compare (OC) modules Configurable as 

Timers/Counters

• Quadrature Encoder Interface (QEI) module 

Configurable as Timer/Counter

• Four Input Capture (IC) modules

• Two UART modules (12.5 Mbps):

- With support for LIN/J2602 2.0 protocols and IrDA

®

• Two 4-Wire SPI modules (15 Mbps)
• ECAN™ module (1 Mbaud) with ECAN 2.0B Support
• Two  I

2

C™ modules (up to 1 Mbaud) with SMBus 

Support

• 4-Channel DMA with User-Selectable Priority 

Arbitration

• UART, SPI, ECAN, IC, OC and Timers

• Sink/Source 18 mA on 18 Pins, 10 mA on 1 Pin or 

6 mA on 66 Pins

• 5V Tolerant Pins
• Selectable Open-Drain and Pull-ups
• 29 External Interrupts

• AEC-Q100 REVG (Grade 1, -40ºC to +125ºC)
• Class B Safety Library, IEC 60730, VDE Certified

• In-Circuit and In-Application Programming
• Two Program and Two Complex Data Breakpoints
• IEEE 1149.2 Compatible (JTAG) Boundary Scan
• Trace and Run-Time Watch