Microchip Technology MA330016 Data Sheet

© 2007-2011 Microchip Technology Inc.

DS70290J-page 253

This section provides an overview of dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 electrical characteristics for
devices operating in an ambient temperature range of -40°C to +150°C. 
The specifications between -40°C to +150°C are identical to those shown in 

for operation between -40°C to +125°C, with the exception of the parameters listed in this section. 
Parameters in this section begin with an H, which denotes High temperature. For example, parameter DC10 in

 is the Industrial and Extended temperature equivalent of HDC10.

Absolute maximum ratings for the dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 high temperature devices are
listed below. Exposure to these maximum rating conditions for extended periods can affect device reliability. Functional
operation of the device at these or any other conditions above the parameters indicated in the operation listings of this
specification is not implied.

Ambient temperature under bias

.........................................................................................................-40°C to +150°C

Storage temperature .............................................................................................................................. -65°C to +160°C
Voltage on V

DD

 with respect to V

SS

  .........................................................................................................  -0.3V to +4.0V

Voltage on any pin that is not 5V tolerant with respect to V

SS(5)

 .................................................... -0.3V to (V

DD

 + 0.3V)

Voltage on any 5V tolerant pin with respect to V

SS

 when V

DD

 < 3.0V

 ....................................................  -0.3V to 3.6V

Voltage on any 5V tolerant pin with respect to V

SS

 when V

DD

 

≥ 3.0V

 ....................................................  -0.3V to 5.6V

Maximum current out of V

SS

 pin .............................................................................................................................60 mA

Maximum current into V

DD

 pin

.............................................................................................................................60 mA

Maximum junction temperature............................................................................................................................. +155°C
Maximum current sourced/sunk by any 2x I/O pin

................................................................................................2 mA

Maximum current sourced/sunk by any 4x I/O pin

................................................................................................4 mA

Maximum current sourced/sunk by any 8x I/O pin

................................................................................................8 mA

Maximum current sunk by all ports combined ........................................................................................................70 mA
Maximum current sourced by all ports combined

................................................................................................70 mA

    

Note 1: Stresses above those listed under “Absolute Maximum Ratings” can cause permanent damage to the

device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods can affect device reliability.

2: Maximum allowable current is a function of device maximum power dissipation (see 

3: Unlike devices at 125°C and below, the specifications in this section also apply to the CLKOUT, V

REF

+,

V

REF

-, SCLx, SDAx, PGCx, and PGDx pins.

4: AEC-Q100 reliability testing for devices intended to operate at 150°C is 1,000 hours. Any design in which

the total operating time from 125°C to 150°C will be greater than 1,000 hours is not warranted without prior
written approval from Microchip Technology Inc.

5: Refer to the “

” section for 5V tolerant pins.