Timex Watch (T2N932) T2N932 Data Sheet

retrograde hand moves relative to the altitude value 

displayed by the 4th center hand.

4.  Push crown in when done.
To change the unit from METERS to FEET or FEET to 

METERS, press C. If button C is not released within one 

second, changes made in calibration are discarded and 

the current altitude is displayed.
AlTIMETEr on/oFF

To turn the altimeter on, press C. The lower retrograde 

hand points to METERS. Using the markings on the top 

ring, the 4th center hand shows the current altitude’s 

hundreds and tens value with divisions every ten 

METERS/FEET. The upper retrograde hand shows the cur-

rent altitude’s thousands value with divisions every one 

thousand METERS/FEET. 

To change the unit from METERS to FEET, press C a sec-

ond time. To change the unit from FEET to METERS, press 

C twice (altimeter is turned off first then turned back on 

with the unit in METERS).

Example: Altitude–2310 m 

Example: Altitude–7580 ft