Timex Watch (T2N932) T2N932 Data Sheet

The temperature sensor is always on and will take a read-

ing at least once every 60 seconds. The temperature is 

indicated by the lower hand and accompanying scale.
When worn on wrist, temperature reading is affected by 

body heat. For more accurate readings, remove watch 

from wrist.
DEPTH SEnSor on/oFF 

The sensor is normally off, and must be turned on manu-

ally prior to submersion. Push and release button B to 

turn the sensor on. The 4th center hand will move from 

the OFF (6 o’clock) position to the 12 o’clock position 

and begin to take readings at least once every 5 seconds. 

As the depth increases, the 4th center hand will point to 

the actual depth as indicated on the depth scale. If the 

readings remain in the range of 0 to 2 meters (0-6 feet) 

for 5 minutes, the sensor will automatically turn off. To 

turn the sensor off manually, press and hold button B for 

2 seconds. The 4th center hand will move to the OFF (6 

o’clock) position.
rECAll MAXIMuM DEPTH/MInIMuM TEMPErATurE

Unscrew the crown and pull to the middle position. The 

center and lower hands will move to display the maxi-

mum recorded depth value and the minimum recorded 

temperature value, respectively. If the watch has not yet 

been used, then the center and lower hands shall move 

to display 0 meters/feet and 0ºC/32 ºF, respectively. The 

crown must be screwed back in prior to use/submersion.
BATTErY lEVEl DETECTIon

The watch determines the battery level status and 

provides the user with a visual indication corresponding 

to the current battery level. The battery level status is