Omnitronic WM-2402 Wirless Microphone 13072002 Data Sheet
Product codes
13072002
00071114.DOC, Version 1.0
13/16
4. OPERATING ELEMENTS AND CONNECTIONS
5
Button RESET
For service purposes only (resets the radio
connection for the 1st channel).
connection for the 1st channel).
6
Signal output
Output of the mixed signal of both channels (6.3
mm jack, unbal.) for connection to a microphone or
line input of a mixer or amplifier.
mm jack, unbal.) for connection to a microphone or
line input of a mixer or amplifier.
7
Button RESET
For service purposes only (resets the radio
connection for the 2st channel).
connection for the 2st channel).
8
Power input
Plug in the connection cable of the supplied power
unit here.
unit here.
1
Reception antennas
Pick up the transmission signal of the hand-held
microphones.
microphones.
2
Power on/off with indicator
Press this button 2 seconds to switch the receiver
on or off. The button lights up as a power indication.
on or off. The button lights up as a power indication.
3
Connection indication MIC 1 and MIC 2
Indicate an existing connection to the
corresponding microphone.
corresponding microphone.
4
Level controls MIC 1 and MIC 2
Controls for the audio signal of the respective
channel at the rear output.
channel at the rear output.