Moxa NPort 5610-8 ports Device Server EU NPORT 5610-8 EU User Manual

Product codes
NPORT 5610-8 EU
Page of 4
8-26
w w w. m o x a . c o m
i n f o @ m o x a . c o m
8
Serial Device Ser
vers  
>
NPort® 5600 Rackmount Series
Serial-to-Ethernet Solutions
Real COM/TTY Ports
NPort
®
 5600 Rackmount Series
8 and 16-port RS-232/422/485 serial device servers
8 or 16 serial ports supporting RS-232/422/485
 
Standard 19-inch rackmount size
 
10/100M auto-sensing Ethernet
 
Built-in 15 KV ESD protection for all serial signals
 
Easy IP address confi guration with LCD panel
 
Choice of confi guration methods: Web console, Telnet console, 
 
and Windows utility
Versatile socket operation modes, including TCP Server, TCP 
 
Client, UDP, and Real COM
SNMP MIB-II for network management
 
NPort® 5600 rackmount device servers can conveniently and 
transparently connect up to sixteen serial devices to an Ethernet, 
allowing you to network your existing serial devices with only basic 
configuration. Data transmission between the serial and Ethernet 
Real COM/TTY drivers are provided that make the serial ports on the 
NPort® 5600 recognizable as Real COM ports by Windows, or Real 
TTY ports by Linux. In addition to supporting basic data transmission 
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the 
RJ45 connector) provide a great tool for basic maintenance tasks and 
help engineers analyze problems in the field. The NPort® 5600’s LEDs 
In some critical environments, termination resistors may be needed 
to prevent the reflection of serial signals. When using termination 
resistors, it is also important to set the pull high/low resistors correctly 
so that the electrical signal is not corrupted. Since no set of resistor 
values is universally compatible for all environments, the NPort® 5600 
has DIP switches on the bottom panel for setting the termination and 
pull high/low resistor values.
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports 
on the front panel, and the 8 or 16 RJ45 serial port connectors on the 
rear panel. This makes the NPort® 5600 device servers suitable for 
interfaces is bi-directional. By using NPort® device servers, you not 
only protect your current hardware investment, but also allow for 
future network expansion. You can both centralize the management 
of your serial devices, and distribute management hosts over the 
network.
and reception, the NPort® drivers also support the RTS, CTS, DTR, 
DSR, and DCD control signals.
not only indicate current system and network status, but also help field 
engineers monitor the status of attached serial devices.
standard 19-inch rack mounting, allowing you to simplify operation, 
maintenance, and administrative tasks.
Network Readiness for up to Sixteen Serial Devices
LED Indicators to Ease Your Maintenance Tasks
Adjustable Termination and Pull High/Low Resistors
19-inch Rackmount Device Server
The certifi cation logos shown here apply to some or all of the products in this 
section. Please see the Specifi cations section or Moxa’s website for details.