Sony CR2025BEA Data Sheet

Page of 5
Page 3/5
PSDS-CR-005 (Ver.5)
January 1, 2013
7.Precautions for safe handling and use
Handling
Since improper battery handling may cause leakage, overheating or explosion 
of the battery, the following precautions shall be observed.
(1) Do not short.
(2) Insert batteries with positive (+) and negative (-) terminals correctly 
oriented.
(3) Do not mix different type batteries or mix new and old ones together.
(4) Do not directly heat, solder or throw into fire.
(5) Do not modify, deform or disassemble the battery.
(6) Do not have children replace batteries unsupervised by adults.
(7) In case of swallowed battery, seek medical attention immediately.
(8) This battery is not designed for recharging. To do so can cause leakage 
or explosion.
Storage
Store in a cool, well-ventilated area. 
Do not store batteries at high-temperatures or high-humidity.
Proper storage temperature is +10℃~+25 . 
It is preferable not to exceed +30 .
Avoid extremely higher or lower humidity (95% or more, 40% or less).
Elevated temperature can result in shortened battery life. 
Avoid exposure to sunlight to prevent performance deterioration, swelling or 
leakage. 
Since short circuit can cause burn hazard and leak or explode hazard, do not 
batteries jumbled in bulk containers. Avoid to contact water, metallic chain or 
metallic chip which may result in short-circuit.
8.Exposure controls/personal protection
N/A
9. Physical and chemical properties
Condition
Solid
Appearance
Coin Shape
Nominal voltage
3 V
10.Stability and reactivity
Stability    :                    Stable under normal conditions of use.
Condition to avoid  :  See Section 7.
11.Toxicological information
Under normal conditions of use, there is no risk to life and health, because ingredients of 
battery is hermetical sealed with metal case.
12. Ecological information
When exhausted battery is buried in the ground, it is confirmed that outflow of metal 
contained in the battery has been seldom found. But we have no ecological information.
13. Disposal considerations
When battery is disposed, isolate positive (+) and negative (-) terminals of the battery to avoid 
those terminals touch each other.    Batteries may be short-circuited when piled up or mixed the 
batteries in disorder.  Dispose in accordance with applicable federal, state and local regulations.