Texas Instruments Hercules TMS570LS04x/03x LaunchPad Evaluation Kit LAUNCHXL-TMS57004 LAUNCHXL-TMS57004 Data Sheet
Product codes
LAUNCHXL-TMS57004
SPNS186A – OCTOBER 2012 – REVISED SEPTEMBER 2013
2.2
Terminal Functions
The following table identifies the external signal names, the associated pin numbers along with the
mechanical package designator, the pin type (Input, Output, IO, Power or Ground), whether the pin has
any internal pullup/pulldown, whether the pin can be configured as a GIO, and a functional pin description.
mechanical package designator, the pin type (Input, Output, IO, Power or Ground), whether the pin has
any internal pullup/pulldown, whether the pin can be configured as a GIO, and a functional pin description.
NOTE
All I/O signals except nRST are configured as inputs while nPORRST is low and immediately
after nPORRST goes High.
after nPORRST goes High.
All output-only signals are configured as inputs while nPORRST is low, and are configured
as outputs immediately after nPORRST goes High.
as outputs immediately after nPORRST goes High.
While nPORRST is low, the input buffers are disabled, and the output buffers are tri-stated.
NOTE
In the Terminal Functions table below, the "Default Pull State" is the state of the pullup or
pulldown while nPORRST is low and immediately after nPORRST goes High. The default
pull direction may change when software configures the pin for an alternate function. The
"Pull Type" is the type of pull asserted when the signal name in bold is enabled for the given
terminal.
pulldown while nPORRST is low and immediately after nPORRST goes High. The default
pull direction may change when software configures the pin for an alternate function. The
"Pull Type" is the type of pull asserted when the signal name in bold is enabled for the given
terminal.
Copyright © 2012–2013, Texas Instruments Incorporated
Device Package and Terminal Functions
9
Product Folder Links: