Chauvin Arnoux CA 5011 Digital-Multimeter, DMM, LCD with 4000 Counts and phases CAT III 1000 V, CAT IV 600 V P01196311E Data Sheet
Product codes
P01196311E
16
This multimeter has automatic recognition of DC and AC.
When switched on, display of:
■
■
■
■
■
AUTO : presence of an AC signal
■
■
■
■
■
AUTO : presence of a DC signal
The “DC/AC” key allows access to the different components of
the signal, if there are any.
the signal, if there are any.
NB: If the switch is turned, the multimeter is reset to automatic mode.
6 SWITCH
Switch with 21 positions to select the functions and ranges and the
OFF position.
OFF position.
7 CONTROL KEYS
NB: These secondary function keys are shown on the digital display.
To switch on and off the display backlighting.
NB: Auto off after 6 minutes
To read the rms value and the possible DC or AC component depending
on the signal present, DC or AC (see in Ch.3 - RMS value)
on the signal present, DC or AC (see in Ch.3 - RMS value)
To read the maximum value. MAX is displayed. Minimum acquisition
time 500 ms.
time 500 ms.
When this MAX key is on, it locks the “AC/DC” function
To hold the display on the last measurement. HOLD is displayed.
When this HOLD key is on, it locks the “AC/DC” function
MAX
3 - RMS VALUE
~
HOLD
~
...