Freescale Semiconductor DEMOJM Microcontroller Evaluation Board DEMOJM DEMOJM User Manual
Product codes
DEMOJM
DEMOJM User Manual
3
•
SCI signals connected to P&E’s Embedded Multilink through jumpers
•
ON/OFF Power Switch w/ LED indicator
•
A 6VDC - 8VDC power supply input barrel connector
Note:
The DEMOJM board power connector is incorrectly labelled as 6-12VDC.
Maximum voltage is 8VDC.
Maximum voltage is 8VDC.
•
Power Input Selection Jumpers for selecting the input voltage source:
•
Power Input from Embedded Multilink to LDO regulator
•
Power Input from DC Power Jack to LDO regulator
•
Power Input from Mini-AB connector
•
Power Input from MCU_PORT connector
•
RESET Push Button and LED indicator w/ Enable
•
User Features:
•
USB device mode and host mode support with Mini-AB USB
connector
connector
•
CAN Module w/Enable
•
3-axis Accelerometer w/Enable
•
8 User LED’s w/ Enable
•
4 User Push Buttons w/ Enable
•
1 Piezo Buzzer w/ Enable
•
IIC Pullups w/ Enable
•
10K Ohm POT w/ Enable
•
Specifications:
•
Board Size 3.5 x 4.0
•
Daughter Card Size 1.4 x 1.5
•
Power Input:
•
USB Cable: 5VDC, 500mA max
•
DC Power Jack: 2.5/5.5mm barrel connector, 6VDC to 8VDC
Center Positive
Note:
The DEMOJM board power connector is incorrectly labelled as 6-12VDC