Freescale Semiconductor Development System for MC9S08MP16 DEMO9S08MP16 DEMO9S08MP16 User Manual

DEMO9S08MP16 User Manual

25

Selects the potentiometer output connection. By default they are both 
connected.

The DEMO9S08MP16 provides 5 jumpers, J14 through J17, for different VDD 
and VSS connections on the bottom of the board. By defualt, they are all 
shorted with jumpers except J17, which is not populated and directly shorted 
by a zero Ohm resistor.

The DEMO9S08MP16 includes P&E’s Embedded Multilink circuitry, so no 
external hardware BDM tool is needed to debug and program the 
DEMO9S08MP16. A user only needs to connect the DEMO9S08MP16 to 
their PC to start developing code for it.

The DEMO9S08MP16 package comes with a special edition of Freescale’s 
CodeWarrior studio. In addition, P&E’s evaluation software for HCS08 and 
ColdFire® V1 is available in the DEMO9S08MP16 Resources section of the 
Getting Started DVD, or online at www.pemicro.com. A user may use either 
CodeWarrior or P&E software tools to develop code for the DEMO9S08MP16.

The CodeWarrior studio supports Freescale’s HCS08 and ColdFire V1 
devices. It offers C, C++, and assembly-level support, and provides 
debugging capabilities based on P&E’s debug and programming 
technologies.

A programming or debug session with the project-based CodeWarrior IDE