Fluke BP291 Li-ion battery with battery compartment lid for 190 series II Fluke ScopeMeter 3894688 Leaflet

Product codes

3894688

LIMITED WARRANTY & LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and
workmanship under normal use and service. The warranty period is one year
or 300 charge cycles and begins on the date of shipment. Parts, product
repairs and services are warranted for 90 days. This warranty extends only to
the original buyer or end-user customer of a Fluke authorized reseller, and
does not apply to fuses, disposable batteries or to any product which, in
Fluke's opinion, has been misused, altered, neglected or damaged by
accident or abnormal conditions of operation or handling. Fluke warrants that
software will operate substantially in accordance with its functional
specifications for 90 days and that it has been properly recorded on non-
defective media. Fluke does not warrant that software will be error free or
operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused
products to end-user customers only but have no authority to extend a greater or
different warranty on behalf of Fluke. Warranty support is available if product is
purchased through a Fluke authorized sales outlet or Buyer has paid the
applicable international price. Fluke reserves the right to invoice Buyer for
importation costs of repair/replacement parts when product purchased in one
country is submitted for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase
price, free of charge repair, or replacement of a defective product which is
returned to a Fluke authorized service center within the warranty period.

To obtain warranty service, contact your nearest Fluke authorized service center
or send the product, with a description of the difficulty, postage and insurance
prepaid (FOB Destination), to the nearest Fluke authorized service center. Fluke
assumes no risk for damage in transit. Following warranty repair, the product will
be returned to Buyer, transportation prepaid (FOB Destination). If Fluke
determines that the failure was caused by misuse, alteration, accident or
abnormal condition of operation or handling, Fluke will provide an estimate of
repair costs and obtain authorization before commencing the work. Following
repair, the product will be returned to the Buyer transportation prepaid and the
Buyer will be billed for the repair and return transportation charges (FOB
Shipping Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, WHETHER ARISING
FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT,
RELIANCE OR ANY OTHER THEORY.

Since some countries or states do not allow limitation of the term of an implied
warranty, or exclusion or limitation of incidental or consequential damages, the
limitations and exclusions of this warranty may not apply to every buyer. If any
provision of this Warranty is held invalid or unenforceable by a court of
competent jurisdiction, such holding will not affect the validity or enforceability of
any other provision.

Fluke Corporation

Fluke Industrial B.V.

P.O. Box 9090

P.O. Box 90

Everett WA

7600 AB Almelo

98206-9090, USA

The Netherlands

SERVICE CENTERS

To locate an authorized service center,

visit us on the World Wide Web:

http://www.fluke.com

or call Fluke using any of the phone numbers listed below:

+1-888-993-5853 in U.S.A. and Canada

+31-40-2675200 in Europe

+1-425-446-5500 from other countries

BP291

Li-ion Battery Pack

Instruction Sheet

Introducing the BP291

BP291 is a Li-ion battery pack for use in the Fluke 190 Series II
ScopeMeter Test Tool. A microcontroller keeps record of the charge
condition of the battery and a LCD display informs you about this
condition.
If all five LCD segments are on, the battery is charged to 100 % of
its present capacity (a segment typically represents 20 % of the
battery’s capacity).
The battery can be charged when installed in the Test Tool or by
External Battery Charger EBC290.
To exchange the battery in Fluke 190 Series II, refer to the Users
Manual of the Test Tool.

Unpacking

Following items should be included in the shipment:
• BP291 Battery Pack.
• Instruction Sheet (this document).

Check the contents of the shipping box for completeness. If
something in the box has been damaged or is missing, contact your
distributor or the nearest FLUKE sales or service office immediately.