Fluke , 9 Hz thermography camera, , 80 x 80 pix bolometer matrix 4484843 User Manual
Product codes
4484843
Thermal
Imagers
Menus
43
Laser Pointer
Applies to: Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125
The laser pointer is a sighting aid and is offset from the infrared camera. As a
result, it may not always represent the exact center of the infrared or visible
image.
result, it may not always represent the exact center of the infrared or visible
image.
The laser dot does not appear on an infrared-only image, but does on visible-
only or AutoBlend images. The laser dot cannot be seen in the visible channel
of the IR-Fusion image if obscured by the center point marker graphic.
only or AutoBlend images. The laser dot cannot be seen in the visible channel
of the IR-Fusion image if obscured by the center point marker graphic.
The laser pointer selections are Trigger Laser, Trigger Torch, and Laser/Torch.
When set, pull the secondary trigger to turn on, release the secondary trigger to
turn off.
When set, pull the secondary trigger to turn on, release the secondary trigger to
turn off.
Warning
To prevent eye damage and personal injury, do not look into the
laser. Do not point laser directly at persons or animals or
indirectly off reflective surfaces.
laser. Do not point laser directly at persons or animals or
indirectly off reflective surfaces.
To set:
1. Push .
2. Push / to highlight Camera.
3. Push or to view the menu.
4. Push / to highlight Laser/Torch.
5. Push or to view the menu.
6. Push / to highlight an option.
7. Push to set the option.
8. Push:
• to set the change and go back to the live view.
• or to set the change and go back to the previous menu.
• to cancel the change and go back to the live view.
The laser warning symbol () shows in the Header zone of the display when
the laser is turned on and you pull the secondary trigger.
the laser is turned on and you pull the secondary trigger.