Fluke Ti100 , 9 Hz thermography camera, -20 to +250 °C, 160 x 120 pix bolometer matrix 3810290 User Manual

46 

To get the best performance from the lithium-ion battery, use the guidelines 
that follow: 

•

  Do not store the Imager on the charger for more than 24 hours as reduced 

battery life may result. 

•

  Charge the Imager for a two-hour minimum at six-month intervals for 

maximum battery life. Without use, the battery will self-discharge in 
approximately six months. Batteries stored for long periods will need two 
to ten charging cycles for full capacity. 

•

  Always operate in the specified temperature range. 

  Caution 

Operating ............................................................ -10 

°

C to 50 

°

C (14 

°

F to 122 

°

F) 

Storage ................................................................ -20 

°

C to 50 

°

C (-4 

°

F to 122 

°

F) 

without batteries 

Charging .............................................................. 0 

°

C to 40 

°

C (32 

°

F to 104 

°

F) 

Relative Humidity .................................................. 10 to 95 % non-condensing 
Altitude 

Operating ............................................................. 2,000 m 
Storage ................................................................ 12,000 m 

CE Directive ........................................................ IEC/EN 61010-1 2nd Edition Pollution 

Degree 2 

Display .................................................................... Color LCD, 3.5

″

 diagonal (Portrait 

orientation) with Backlight (selectable 
high, medium, low) 

User-selectable Temperature Scale (

°

C/

°

F) 

Center Point Temperature 
Language Selection 
Time and Date Settings 
Emissivity Selection 
Background (reflected) Compensation 
Transmission Correction (all models except Ti100, Ti105, TiR105) 
IR-Fusion

®

 (all models except Ti100) 

Color Palettes 
Level and Span 
User-selectable Display Graphics