Testo 882 , 33 Hz thermography camera, -20 to +350 °C, 320 x 240 pix bolometer matrix 0560 0882 User Manual
Product codes
0560 0882
5 First steps
15
5
First steps
5.1.
Commissioning
Connect rechargeable battery
The thermal imager is delivered with a rechargeable battery that is
inserted in the rechargeable battery slot but not connected.
> Push the battery all the way into the rechargeable battery slot
The thermal imager is delivered with a rechargeable battery that is
inserted in the rechargeable battery slot but not connected.
> Push the battery all the way into the rechargeable battery slot
until this is flush with the bottom of the handle.
- The thermal imager starts automatically.
Perform basic settings
> Remove the protective film from the display.
- The start screen appears on the display.
- The
> Remove the protective film from the display.
- The start screen appears on the display.
- The
Landeseinstellungen
(
Country settings
) dialogue is
opened.
Instrument language (
Language
) and temperature unit (
Unit
) can
be set.
1. Move
1. Move
Joystick
up/down to select the desired option.
- The selected option has an orange border.
2.
2.
Confirm the selection with
[OK]
.
- The selected setting is highlighted orange ( ). The arrows ( )
show that the setting can be changed.
3.
Move
Joystick
up/down to change the setting.
4.
Confirm the entry with
[OK]
.
5.
Confirm the settings with
Übernehmen
(
Apply
)
.
6.
Press
[
]
to switch off the thermal imager.